SINGER W4910 Euroflair User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Connecting the foot control

Remove the cord from the foot control and place the

control under the table. Insert the foot control plug into
the socket on the right-hand side of the machine.

Connecting to the wall outlet

The voltage (V) and frequency (Hz) are indicated

under the base of the machine. Check that these values
correspond to those of the electricity source before
connecting the machine.

Connecting the machine

Free arm

Trouser legs and sleeves can be drawn onto the free

arm, making it easy to sew, mend or patch these parts.

The free arm also makes it much easier to attach collars
and cuffs as well as sew small children’s clothes, or dam
socks and stockings on the machine.

Extension table

When you need a larger working surface, attach the

extension table.

When positioning the extension table over the free

arm, fit the two studs into the holes at the rear of the free
ami. Pull out the catch under the front of the table and fit

it into the hole for this purpose on the free arm.

When removing the table, pull out the catch and lift

the table away.

"

L

Advertising