SINGER W4910 Euroflair User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Maintenance
Care of the machine
To keep your sewing machine operating satisfactorily
it requires, like other precision machines, regular clean
ing. It need not, however, be lubricated. The stitch plate
should occasionally be removed. Remove the presser
foot and lower the feed dog. There is a recess in the free
arm to the right above the hook cover. Push the stitch
plate straight up approx. 1 mm and backward at the
same time until it loosens. Clean between the teeth of the
feed dog with the brush you will find in the accessory
box.
Whenever necessary the bobbin case and hook should
also be brushed clean. Sizing or finishing compounds
from the fabric may adhere to the spindle of the hook. If
this has happened, the spindle should also be cleaned
with the brush. Remove any pieces of thread which may
have become wound round the spindle.
When replacing the stitch plate, insert it from behind
into the recess in the arm. Ease the front edge up onto
the small pin and continue to push it forward until it
snaps into place.
Belts
Belt adjustment is not required.
39