SINGER 214 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

9

Rarse the presser foot lever to allow the

thread to pass between the tension control
discs.

* Raise the thread take-up lever to its highest

position by rotating the hand wheel toward
you.

Holding the thread taut with your right
hand, draw the

thread

through the thread

guides as illustrated.

*

Thread

the take-up lever from left to right,

* Thread the needle from front to back,

drawing 4 inches (10 cm) of thread through
the eve of the needle.

Advertising
This manual is related to the following products:

212