Remove the bobbin case from the machine – SINGER 214 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Remove the Bobbin Case from the Machine
1* Raise the needle to its highest position by turning
the hand wheel toward you.
2. Locate the notch at the left end and
open the shuttle cover by pulling
forward and down*
3. Use your forefinger and thumb to pull
open the latch on the bobbin case.
4. Pull the bobbin case straight out.
5. Release the
latch
and the bobbin will
drop out of the case.
Advertising
This manual is related to the following products: