SINGER 214 - Manual (Page 22)

SETTINGS
Sxkch length- 0 . 5 î o 1
Speed range - LOW
* Always make a practice buttonhole on a scrap of the
fabric you plan to use. Then try the buttonhoie with the
selected button*
* Use interfacing between the two layers of fabric>
20
Carefully mark the buttonhole
length on your garment and
insert it under the foot Set zigzag width at
Stitch to the end of the
marking* Stop with the
needle in the fabric at
point A*
BA
Set zigzag width at Z and
take one stitch to the left
(point SL
the presser foot and
turn the fabric with the
needle in it* Lower the presser
foot and take one stitch to
the right {point CK
Set zigzag width at 4 and
bartack at least four stitches*
Stop at point D.
Set zigzag width at t>í and
stitch to the end of marking
(point £)*
bartack at least four stitches*
Stop at point F*
Set zigzag width at 0 and
take a few stitches in reverse.
Remove the fabric and cut
the hole open.