Wind the bobbin – SINGER 214 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Wind the Bobbin
7
1, Fit the felt disc over the spool
pm
and put a spool of thread on the
spool pin.
2. Draw the thread through from the spool through the bobbin
winder tension disc.
3. a. Pull the end of the thread through the hole in the bobbin,
b. Place the bobbin onto the bobbin winder shaft with the end of
the
thread
coming from the top of the bobbin.
4, a. Push the bobbin winder shaft to the right until it clicks.
b. Hold onto the end of the thread.
c> Start the machine by shifting the power switch to ''LOW" or
"HIGH" position. After several rotations of the bobbin release
the
thread.
NOTE: Keep away from the needle while the machine is running.
5, a. Turn off the powerswitch when the bobbin stops turning with
the
thread
filled.
b. Push the shaft to the left to remove the bobbin.