Changing the needle, To select a suitable needle – SINGER W1407 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
CHANGING THE NEEDLE
1. Turn the hand wheel towards you
until the needle is at its highest posi- :
tion. 1
2. Loosen the needle clamp screw by i
turning its top edge towards you.
Remove the needle from the clamp. i
■.
- ;>
....................
I2i
(4)
(3)
i
clamp with its flat side facing away
from you. Push the needle up into
needle clamp as far as possible.
Tighten the needle clamp screw
firmly.
TO SELECT A SUITABLE NEEDLE
Stem
rZD
A number indicating the size of
needle is marked on the stem. The
higher the number, the thicker the
needle.
Do not use any needle which is bent
or blunted.
Advertising