SINGER W1407 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
WINDING THE BOBBIN
1. Release clutch by turning clutch
knob toward you.
2.
Draw thread from spool through
bobbin winder tension disc as shown.
3. Pull end of thread* through hole in
bobbin as shown.
4. Place bobbin onto bobbin winder
shaft with end of thread coming
from the top of the bobbin. Push
bobbin winder shaft to the right
until it clicks. Holding onto end
of
thread,
start
machine.
When
bobbin is slightly filled, snip off
end of thread.
5. Wind thread until winder stops.
Remove bobbin. Clip thread.
6. Tighten clutch knob.
11
Advertising