SINGER W1407 - Manual (Page 35)

SEWING ZIPPERS
Presser foot................................................zipper foot
Pattern selector.......................................... A(---------- )
Stitch length dial......................................... 1 to 4
Zipper foot
Raise the foot. Raise needle to its
highest position by turning the hand
wheel towards you. Replace the foot
— witb-Ae-zippefteot--------------------------------
1. Pin or baste the zipper tape to the
fabric and place the work-piece in
position under the foot.
Attach snap on zipper foot so that
the needle passes on its left hand -.............17^
side.
* When starting to sew, both needle
and bobbin threads ends should be
drawn under the foot.
2. Sew on the right side of the zipper
by guiding zipper teeth as close as
possible to the needle drop. Before
the foot reaches the slider on the
zipper tape, raise the foot and open
the zipper by keeping the needle in
the fabric.
Lower the foot and sew on the
remainder of the seam.
3 To sew the left side of zipper change
position of foot to bring the foot
to the left side of the needle. Sew
in the same way as on the right
side of zipper.
Zipper foot
\
Tape Element
Fig. 3
33