SINGER W1407 User Manual

Page 33

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SEWING BUTTONHOLES (continued)

1. Set the pattern selector at " E Then

pass the needle thread through the

opening in the buttonhole foot and draw

both needle and bobbin threads to the

left side. Turn the hand wheel towards

you until the needle comes to the point

(

1

) .

2. Lower the foot and sew slowly until a

desired length is sewn, then stop the

....................................................................

3. Raise the needle and set the pattern

selector at " ffl ", Then sew several

stitches of bar tack until the needle

is at point (3).

4. Raise the needle and set the pattern

selector at ''

¡1

then sew the right

side of buttonhole just as the same length

as the left side of buttonhole. Stop the
machine at (4j.

5. Raise needle and set the pattern selector

E ", then sew several stitches of

final bar tack. Stop the machine with the

needle at point (5). To lock threads, set

the pattern selector at "B (zero point of

zigzag width) and sew a few stitches.

6. Cut the buttonhole open carefully using

a seam ripper, taking care not to damage

the bar tacks.

Place a pin across each end of buttonhole
to protest end stitching.

0

31

Advertising