Removing and attaching the presser foot, To ramove, To attach – SINGER W1407 User Manual
Page 12: Removing and attaching the presser foot q
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REMOVING AND ATTACHING THE PRESSER FOOT
To Ramove;
1. Turn the hand : wheel towards you until
the needle is at its highest position. Raise
the presser foot by lifting the presser foot
lifter.
,
2
.....
B.'^JiftiDM--A>3JsmL3BJbehsckMtbslQQi
...............
holder, the presser foot will drop off.
Note: *Do not force the presser foot to
remove it
To Attach:
1. Place the presser foot so that the pin on
the foot lies just under the groove of the
foot holder. Lower the foot holder.
2. When the presser foot lifter is raised
you'll find the presser foot is locked in
piece.
/
Presser^
Z
foot // W
T' ' ■ ..... ..
10
Advertising