4) cloth guide, 5) adjusting thread tension – SINGER W1810 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(4) Cloth guide
Use cloth guide when sewing a long seam of
regular distance from edge of material.
Set guide in hole on arm, at right of needle
plate, and adjust distance.
Run machine with edge of fabric touchinq
guide.
Position cloth guide at an angle to sew a curved
seam.
Sew reverse stitches for reinforcement at end
of seam.
Draw fabric to left when sewing is finished.
Cut threads with thread cutter behind
bar.
presser
(5) Adjusting thread tension
Test stitch performance on a scrap of material
you are going to use.
With correct tension (@), upper and lower
threads tension is equal and strong enough
to lock both threads in center.
If upper tension is too tight (loose), upper
(lower) thread lies straight along upper (lower)
surface of fabric ((£).©). Correct by turning
tension dial.
^
-12-