Making buttonholes, 1) changing presser foot – SINGER W1810 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
9. MAKING BUTTONHOLES
Set machine as shown.
(1) Changing presser foot
Raise presser foot lifter ©.
Set needle in the highest position by turning
handwheel towards you
Push the lever®in the arrow direction so that
the presser foot will come off.
Position a new foot with the pin ® right under
the groove of the holder.
Lower the presser foot lifter so that the foot will
be automatically snapped on.
Advertising
This manual is related to the following products: