Embroidery – SINGER W1810 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
___ ___ :.
Set machine as shown.
Remove foot, and holder screw.
To avoid lower thread being pulled up, reduce
upper thread tension.
For good embroidery, it is important to use
correct needles and thread.
Use thin embroidery silk for upper thread and
a thinner silk of same kind and color for lower
Trace your design on material and center it in
Make sure material is taut.
Pull out lower thread by turning hand wheel
towards you while holding upper thread
Lower presser foot lifter.
Hold both threads and start sewing along
outline of design with satin stitch.
Continue sewing guiding hoop by hand.
To finish filling, sew several stitches with zigzag
width at 0.
embroidering sheer fabric.