Mending, 1) patching, 2) mending a rip – SINGER W1810 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set machine as shown.
Place the patch over the worn part.
Sew along the edge of the patch on the right
side. Trim away the worn part close to the
seam on back side.
(2) Mending a rip
Set machine in the same way as for patching.
Sew the edges of tear together first.
Then sew two more seams on either side.
A piece of gauze can be placed underneath to
reinforce the rip.