Needle changing and setting – SINGER W1810 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
27. NEEDLE CHANGING AND SETTING
Set needle in the highest position by turning
handwheel towards you.
Loosen needle clamp screw and remove
needle.
With flat face away from you, insert a new
needle into groove of needle bar.
Push needle until it reaches stopper © and
tighten needle clamp screw firmly.
Always use a straight needle with a sharp point.
Using defective or worn needles not only
causes stitch skipping, breakage of needles or
snapping of thread; it also can damage hook
and needle plate.
Advertising
This manual is related to the following products: