SINGER W1810 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
18. ROLL HEMMING
Set machine as shown.
@ With straight stitch
(B; With zigzag stitch
Make 0.3cm(1/8") double fold for about 5cm
(2") at very edge of material, and crease it.
Sew twice at 0.6cm(1/4”) from edge.
Draw out work and leave about 15cm(6'') of
thread.
Place material under presser foot and guide
edge into scroll, pulling six thread ends towards
back.
Sew a few stitches as shown.
Keep guiding material holding raw edge adout
0.6cm(1/4") in front of foot.
■’•'и
■ %
Advertising
This manual is related to the following products: