SINGER W1810 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Push bobbin to right and press down foot
controller.
Machine stops automatically when winding
is full.
Push bobbin to left.
Take off bobbin from spindle and cut thread.
Retighten stop motion knob.
If bobbin is wound unevenly as shown, open
face cover and loosen set-screw of the guide
for bobbin winding, by using screw driver and
adjust height.
Advertising
This manual is related to the following products: