Zoom R16 - Manual (Page 24)

Trac
k assignment
23
Press and hold [EXIT] to
return to the top screen.
6
Press [PROJECT].
P R O J E C T
> S E L E C T
1
Assign the playback file to a
different tracks.
Select
2
P R O J E C T
> F I L E
Menu
change
Press [ENTER].
NOTE
• Recorded audio files on tracks will be overwritten
by new recording. If you rewind the counter to
the top and begin recording again, be aware that
the overwritten previous recording will be lost.
• During playback the file assigned to the track is
played.
• If you want to record to a new file, do not assign
any file to a track.
• When you move a file on a track, confirm that no
files are assigned to the track to be recorded
(“NOT ASSIGN”). If there is any assigned file, that
recording will be overwritten by new recording.
• Files exclusively for reading (read only) are shown
with <R.0> on the display, and you cannot record
over them if they are assigned to tracks.
• Files marked with an asterisk (*) cannot be
assigned to the selected track.
T R A C K 5
M O N O - 0 0 0 [ T R 5 ]
5
Assign it.
Press [ENTER].
3
Select the track for playback.
T R A C K 1
N O T A S S I G N
Track
change
Select a different track from the one for
the next recording.
File change
4
Select the file for the track.
T R A C K 5
M O N O - 0 0 0 [ T R 5
Playback track preparation
7
Prepare the already recorded
track for playback.
Press the [PLAY/MUTE/
REC] of the track to be
played back 1–2 times until
the green light turns on.
Green light on: playback enabled [PLAY].
HINT
• File track assignment status
• If the first and second recordings are on different
tracks, you can skip to Step 7, because you
only need to change the track status and start
recording.
• You can select tracks using the status key. The
indicators of selectable tracks will light orange.
• You can assign files imported from a computer or
USB memory.
• Stereo files can only be assigned to the tracks set
to stereo link or the master track.
Display of a track with no file
T R A C K 5
N O T A S S I G N
Display of track with no assigned files
T R A C K 5
M O N O - 0 0 0
Display of a track with assigned file
T R A C K 5
M O N O - 0 0 0 [ T R 3 ]
Track assignment
Here, after completing the first track recording, we record the next track while playing back the already
recorded audio file. The preparation is almost identical to the first one, but we will conduct playback on
a different track.
>FILE
.
Track recording