Recording to the master track, Hint – Zoom R16 User Manual

Page 43

Advertising
background image

Recor

ding to the master trac

k

Play the master track

Disable master track playback.

Preparation: Adjust the signal levels.

42

Recording to the master track

Record a "final" stereo mix as a mix down on the [MASTER] track. Signals are recorded to the [MASTER]
track after passing through the [MASTER] fader.

HINT

• Each project can have one master track.

• The master track will have a file assigned.

• You can even mix down from the middle of a song,

overwriting the data of the recorded section.

• During recording you can confirm the playback

levels of each track and the recording levels of

the master track.

• The signals sent from the OUTPUT jacks are

the same signals that have passed through the

[MASTER] fader.

• You can use the [UNDO/REDO] key.

• You can use the metronome during playback.

Consecutive playback of

multiple master tracks.

No.65

Press [MASTER/MIX

DOWN/PLAY] 1-2

times until the light

turns off.

Light off: muted

4

Muting of the other tracks

is canceled and their status

lights become as they were

before enabling master track

playback.

1

Press [MASTER/MIX

DOWN/PLAY] 1-2 times

until the green light

turns on.

Green light on: playback enabled

Doing this mutes the other tracks and

disables all effects.

Mix down/Bounce

2

Press [REW] & [Stop] at

the same time to return

the counter to the head.

3

Press [STOP] to stop playback.

1

Press [REW] + [STOP]

at the same time and

then [PLAY] to start

playback from the top.

Play the tracks, and adjust the

mix balance of the tracks.

Recording to the master track

NOTE

The settings of the pan/balance, insert and send/

return effects of each track affect the signals sent to

the master track and are reflected in its sound.

Press [MASTER/MIX

DOWN/PLAY] 1-2

times until the red light

turns on.

Red light on: recording enabled

4

3

Press [STOP].

7

Press [STOP] to stop

recording.

Adjust the level of the signal that

passes through the master fader.

2

Red

Orange

Green

Green

Carefully control

the level so as

not to light the

red indicator

(clip=0dB).

6

Press [REC] and [PLAY]

in turn to start recording.

5

Press [REW] & [Stop] at

the same time to return

the counter to the head.

Recording to the [MASTER] track.

Press [PLAY] to start

playback.

Advertising