Zoom R16 - Manual (Page 41)

Bounce/Pr
oject>Rec setting>Bounce
40
6
Bounce (recording)
4
7
8
9
Press and hold [EXIT] to
return to the top.
Select OFF to exit bounce mode.
3
Press [SWAP/BOUNCE].
1
Press [PLAY/MUTE/REC] of the bounce
destination track.
Press it 1-2 times until the
green light turns on.
Green light on: playback enabled (PLAY)
2
Press [PLAY/MUTE/REC] on the tracks
bounced.
Press 1-2 times each until
the light turns off.
Light off: MUTE (no sound)
3
Press [REW] & [Stop] at
the same time to return the
counter to the head.
Playback the track after bouncing
Press [PLAY] to start playback.
4
5
Press [STOP] to end the bounce.
Press [REW] & [Stop] at
the same time to return the
counter to the head.
Press [REC] and then
[PLAY] to start recording.
Green light on Red light on
Adjust the mix balance (audition)
Press [PLAY] to start playback.
1
Adjust the mix balance including
REC LEVEL, volume, PAN and EQ
for each track.
Make sure that the red
(0 dB) signal does not
light on the MASTER
level meter.
2
Press [STOP] to stop playback.
3
Select >BOUNCE .
S W A P / B O U N C E
> B O U N C E
Change
menus
Set On/Off
Press [ENTER].
Select On .
B O U N C E
O n
Press [ENTER].
Proceed to the next step or cancel
BOUNCE icon
appears on display