Computer connection, Hint – Zoom R16 User Manual
Page 73
Computer connection
72
Computer connection
Use USB to connect an R16 to a computer (Windows or Macintosh OS) .
HINT
• Card reader OS compatibility
Windows: Windows XP and later
Macintosh: Mac OS x 10.2 and later
•
Project data is saved to the ROOT DIRECTORY of
the SD card as PROJxxx (xxx is the project number)
and audio data is saved as “WAV” files inside
“AUDIO” in the project directory.
• The
MASTER track and stereo tracks are stereo
WAV files.
NOTE
•
To import an audio file into the R16, its format must
be WAV with a sampling frequency of 44.1 kHz and
a bit rate of 16 or 24.
•
File names should use only capital letters, numbers
and the "_" (underscore). They should be 8 or fewer
characters plus the “.WAV” extension.
•
You can connect the R16 and a computer by USB
when the power is on. If you connect the R16 by
USB when its [POWER] switch is OFF, you can start
it up with power supplied over USB.
• When you are using the R16 as a card reader
or as an audio interface, you cannot use it as a
recorder.
USB
For details about use with a computer, refer to the detailed
manual (PDF) on the CD-ROM included with the R16.
By connecting this unit to a computer, you can
use it as an SD card reader, an audio interface
for sound input and output and a control surface
to control DAW software.