Zoom R16 - Manual (Page 82)

R16 eff
ect types and parameter
s
81
R16 effect types and parameters 3
Vibe
Depth Rate Tone Balance
Effect with automatic vibrato.
Step
Depth Rate Resonance Shape
Special effect that changes the sound in a staircase pattern.
Cry
Range Resonance Sense Balance
Varies the sound like a talking modulator.
Exciter
Frequency Depth Low Boost
Enhances the sound outline, making it more prominent.
Air
Size Reflex Tone Mix
Recreates the airy ambience of a room, with a feeling of depth.
Delay
Time Feedback Hi Damp Mix
Delay effect with a maximum setting of 2000 ms.
Analog Delay
Time Feedback Hi Damp Mix
Delay effect with a maximum setting of 2000 ms. Simulates the warm sound of an analog delay.
Reverse Delay
Time Feedback Hi Damp Balance
Reverse delay effect with a maximum setting of 1000 ms.
ARRM Pitch
Type Tone RTM Wave RTM Sync
Changes the pitch of the original sound in time with the tempo of a rhythm.
Parameter descriptions
Parameter
name
Setting range Description
Depth
Exciter: 0~30 Adjusts effect depth.
All others: 0~100 Adjusts modulation depth.
Rate
Chorus, Ensemble: 1~50 Adjusts modulation rate.
Flanger, Vibe, Step: 0~50 (P.86 Table1)
Adjusts modulation rate. Using a rhythm tempo as reference, setting
in note units is also possible.
Tone 0~10 Adjusts tonal quality.
Mix 0~100 Adjusts mix ratio of effect sound to original sound.
Resonance
Flanger: −10~10
Adjusts resonance intensity. Negative values result in reversed phase
of effect sound.
Step, Cry: 0~10 Adjusts effect intensity.
Manual 0~100 Adjusts frequency range of effect.
Shift −12~12, 24 Adjusts pitch shift amount in semitone units.
Fine −25~25 Adjusts pitch shift amount in cent (1/100 semitone) units.
Balance 0~100 Adjusts balance between original sound and effect sound.
Shape 0~10 Adjusts effect sound envelope.
Range 1~10 Adjusts frequency range of effect.
Sense −10~−1, 1~10 Adjusts effect sensitivity.
Frequency 1~5 Adjusts frequency of effect.
Low Boost 0~10 Adjusts low frequency boost.
Size 1~100 Adjusts size of simulated space.
Reflex 0~10 Adjusts amount of wall reflections.
Time
Wide: 1~64
Adjusts delay time. Delay, Analog Delay:1~2000ms (P.86 Table1)
Reverse Delay: 10~1000ms (P.86 Table1)
Wet Level 0~30 Adjusts effect sound level.
Dry Level 0~30 Adjusts original sound level.
Feedback 0~100 Adjusts feedback amount.
Hi Damp 0~10 Adjusts intensity of delay sound high range damping.
Type P.86 Table 5 Selects pitch change type.
RTM Wave P.86 Table 3 Selects control waveform.
RTM Sync P.86 Table 4 Selects control waveform cycle.
Type Parameter/Description
ZNR
Threshold
ZOOM original noise reduction for reducing noise during playing pauses without affecting the overall tone.
Parameter description
Parameter
name
Setting range Description
Threshold Off, 1~30
Adjusts ZNR sensitivity. For maximum noise reduction, set value as
high as possible without causing the sound to decay unnaturally.
ZNR module