Bryant evolution thermostat - Manual (Page 13)

NORMAL OPERATION 9
Cooling
To select cooling, press the blue COOL button.
Cooling is confirmed when the blue LED
adjacent to the blue COOL button is lit.
Cooling is operating when the blue LED is
gradually pulsing on and off. (The LEDs can
be turned off. For details, see ADVANCED
SETUP – DISPLAY on page 30.) The pro-
grammed cooling temperature will appear in
the lower right screen with the text, “COOL AT.”
Auto
The AUTO function allows your Evolution
®
Control to automatically switch between heat-
ing and cooling operation to maintain your
comfort during transitional heating and cooling
seasons. To select AUTO operation, press the
red HEAT and blue COOL buttons simultane-
ously. The red and blue LEDs will light up, and
both heating and cooling temperatures will be displayed.
Adjust Heating Temperature
The Evolution
®
Control allows you to adjust your indoor tempera-
ture at any time, overriding your programmed settings.
1 Press the red HEAT button. Heating is confirmed when the
red LED adjacent to the red HEAT button is lit.
2 Press the ZONE button until the name of the zone you wish
to control appears on the upper left screen. Selecting “ALL
ZONES” allows you to select one temperature for the entire
home. Press the ZONE button for three seconds to activate
the “ALL ZONES” features.