Normal operation 10 – Bryant evolution thermostat User Manual
Page 14
NORMAL OPERATION
10
3
Use the Right Up/Down button to select your desired tempera-
ture, which will be displayed on the lower right. An override
time will be displayed on the lower left. Please note an over-
ride time will not appear if programming has been turned off.
4
You can change the override time in 15-minute increments by
pressing the Left Up/Down button until the desired override
time is selected.
- OR -
Press the HOLD button to override the schedule indefinitely.
Adjust Cooling Temperature
1
Press the blue COOL button. Cooling is confirmed when the
blue LED adjacent to the blue COOL button is lit.
2 Press the ZONE button until the name of the zone you wish
to
control appears on the upper left screen. Selecting “ALL
ZONES” allows you to select one temperature for the entire
home. Press the ZONE
button for three seconds to activate
the “ALL ZONES” feature.
3
Use the Right Up/Down button to select your desired temper-
ature, which will be displayed on the lower right. An override
time will be displayed on the lower left. Please note an over-
ride time will not appear if programming has been turned off.
4
You can change the override time in 15-minute increments
by pressing the Left Up/Down button until the desired over-
ride time is selected.
- OR -
Press the HOLD button to override the schedule indefinitely.