Advanced setup 33 – Bryant evolution thermostat User Manual
Page 37
ADVANCED SETUP
33
Vacation Settings
You can pre-select temperature, humidity and fan settings for your
VACATION function. These settings will take effect when you activate
VACATION operation as outlined on pages 11-12.
1
Open the door of the Evolution
®
Control.
2
Press the ADVANCED setup button.
3
Press the RIGHT button four times to select the VACATION
screen (5 of 7).
4
Use the Right Up/Down button to select the highest temperature
the system will allow during VACATION operation.
5
Press down on the SCROLL button to select MIN TEMPERATURE.
6
Use the Right Up/Down button to select the lowest temperature
the system will allow during VACATION operation.
7
Press down on the SCROLL button to select MAX HUMIDITY.
8
Use the Right Up/Down button to select the highest humidity the
system will allow during VACATION operation.
9
Press down on the SCROLL button to select MIN HUMIDITY.
10
Use the Right Up/Down button to select the lowest humidity the
system will allow during VACATION operation.
11
Press down on the SCROLL button to select FAN.
12
Use the Right Up/Down button to select AUTO, LOW, MED or
HIGH fan operation.
13
To exit, press ADVANCED or simply close the door.
NOTE: You can exit at any time. When exiting, you will be
prompted to save changes if you have made any. Select “YES”
to save your changes, “NO” to revert back to previous settings.