Programmable features, 21 setup & operation – Bryant evolution thermostat User Manual

Page 25

Advertising
background image

9

Set the cooling temperature using the Right Up/Down button.

10

Use the SCROLL button to highlight the next period, then repeat

steps 5 – 9 to select settings for DAY, EVENING and SLEEP

.

11

Exit by pressing the SCHEDULE button or closing the door.

- OR -

12 To create a WEEKDAYS schedule for the remaining zones, press

the ZONE button to select the next zone you wish to program.

Then, repeat steps 4 – 10 in this section.

- OR –

13

Begin entering your WEEKEND schedule by pressing the RIGHT

button and following the Weekend Schedule instructions (the

next section in this manual).

Weekend Schedule

You can program an identical schedule for Saturday and Sunday

using the WEEKEND screen.

1

Open the door of the control.

2

Press the SCHEDULE button to access the schedule screen.

3

Select the zone you want to program by pressing the ZONE

button until the correct zone name appears on the upper left

screen. Selecting “ALL ZONES” allows you to create one

WEEKEND schedule for the entire home.

4

If the word “WEEKEND” appears at the top of the screen, you

are ready to start. If not, press either the LEFT or RIGHT button

as necessary until WEEKEND is displayed. The WAKE time

period will be highlighted.

5

Using the Left Up/Down button, set the start time for this period.

6

Press the red HEAT button. Heating temperature will begin

flashing.

PROGRAMMABLE FEATURES,

21

SETUP & OPERATION

Advertising