Bryant evolution thermostat - Manual (Page 39)

NOTE: You can exit at any time. When exiting, you will be
prompted to save changes if you have made any. Select “YES”
to save your changes, “NO” to revert back to previous settings.
See “Normal Operation” section of this manual for instructions
on how to select UNOCCUPIED operation.
Zone Names
You can name each zone in your home for easy identification. The
zone names you enter will replace the factory default names. The
zone names will appear at the Evolution
®
Control and optional
Smart Sensor(s).
1 Open the door of the Evolution Control.
2 Press the ADVANCED setup button to view 1st ADVANCED
setup display (1 of 7).
3 Press the LEFT button to select the ZONE NAMES display (7 of 7).
4 The first zone name will be highlighted. You can change the
zone name, or select a different zone by using the SCROLL
button to highlight the name you wish to change.
5 Use the Right Up/Down button to highlight the letter you wish to
change.
6 Use the Left Up/Down button to select the letter.
7 Repeat steps 5 and 6 as needed to complete the zone’s name.
8 Continue until all zones have been named to your satisfaction.
9 To exit, press ADVANCED or simply close the door.
NOTE: You can exit at any time. When exiting, you will be
prompted to save changes if you have made any. Select “YES”
to save your changes, “NO” to revert back to previous settings.
ADVANCED SETUP 35