Bryant evolution thermostat - Manual (Page 29)

5 You will be prompted to select YES to continue or NO to return
to the schedule screen. Press the RIGHT button to select YES.
6 Use the SCROLL button to highlight the first zone to which you
would like to copy.
7 Use the Right Up/Down button to select YES to copy, or NO to
not copy.
8 Repeat steps 6 & 7 until YES appears with each zone to which
you would like to copy.
9 Press the RIGHT button to copy or the LEFT button to cancel.
10 A confirmation screen will list the zones to which you would like
to copy. If the list is correct, press the RIGHT button to confirm
and return back to the SCHEDULE screen. If you would like to
make a change, press the LEFT button to return to the COPY
ZONE screen.
11 Exit the scheduling mode by either closing the door or
pressing the SCHEDULE button.
Programming Fan Speed
You can select a different fan speed for each time period of your
comfort schedule. Scheduling the fan speed follows the same
basic steps as programming time and temperature settings. You
can create one fan schedule for ALLDAYS, WEEKDAYS, WEEKENDS,
or a different schedule for each day.
Programmable fan is automatically defaulted to off. Your dealer will
need to turn programmable fan on in the dealer thermostat setup
screens.
1 Open the door of the control.
2 Press the SCHEDULE button to access the schedule screen.
PROGRAMMABLE FEATURES, 25
SETUP & OPERATION
PROGRAMMABLE FEATURES, 25
SETUP & OPERATION