Bryant evolution thermostat - Manual (Page 41)

• Pressing HOLD / UNOCCUPIED button for approximately 3 seconds
will display UNOCCUPIED status on lower left screen. Pressing
button again for approximately 3 seconds will release UNOCCUPIED
status and return to previous mode.
Continuous Fan Adjustment
Pressing the FAN button will scroll through the following: AUTO, LOW,
MED, HIGH.
• When AUTO is selected, zone airflow is available only when a
heating or cooling demand exists within the zone.
• When LOW, MED, or HIGH is selected, zone airflow will be
continuous without a heating or cooling demand.
Outdoor Temperature and Indoor Relative Humidity
The current outside temperature is displayed in upper left corner of
the LCD.
• Press and release the HUMIDITY / OAT button to view % Indoor
Relative Humidity; value is measured at Zone Control (User
Interface.)
• Outdoor temperature will return after five seconds or after the
button is pressed again.
Keypad Lock
The Smart Sensor can be locked if the FAN and HUMIDITY / OAT
buttons are pressed simultaneously for approximately 3 seconds.
A padlock icon will appear and all push button functions will be
ignored. Pressing the FAN and HUMIDITY / OAT buttons again for
3 seconds will unlock the Smart Sensor.
Vacation
• When the VACATION mode is activated from Zone Control (User
Interface), the Smart Sensor will display the “VACATION” icon in the
lower left area of the LCD. If the Right Up/Down button is pressed,
the override timer will display “2-hours.” This can either be
increased or decreased with the Left Up/Down button. When the
override timer expires, the Vacation setpoints return.
SMART SENSOR OPERATION 37