Yaesu FT-60R - Manual (Page 30)

R. G. Sparber KG7MQL February 22, 2015 Page 30 of 52
Step 5: I briefly pressed the F W key which replaces the previous name with all
dots.
In the upper left corner it says SEt.
Step 6: I rotated the Dial knob and now see "A" as the
first character of the new name.
Step 7: I pushed the
F W key and then turned the Dial
knob until I saw "B".
Step 8 is really not a step. It is a note telling you that
the
down key lets you move back to a previously input
character.
What they don't mention is that you can also use the
up key to move to a character position to the right of
your present location. You will hear a higher than
normal frequency beep if you try to move beyond the
defined characters.
They also don't mention that pressing the Push To
Talk key now will abort the function. This does not
cause you to transmit.