Yaesu FT-60R - Manual (Page 6)

R. G. Sparber KG7MQL February 22, 2015 Page 6 of 52
At the bottom of some sections is a reminder of the key and knob sequence. If the
reminder starts with "VFO-" it means you must be in VFO mode. "MEM-" means
you must be in Memory mode. If neither is present, then the sequence works in
both VFO and memory modes. All of these reminders have been collected and
are presented in Appendix 1.
Each action is followed by a "/" except the last one.
"Dial" means you turn the Dial knob to select some parameter or state.
If only a key is shown, then you press it briefly. If the key is followed by " 1s" it
means you press the key for about 1 second.
Appendix 2 holds an alternative Table of Contents for the FT-60 R/E Operating
Manual. The topics have been organized in a different sequence so the page
numbers are not always in order.