Yaesu FT-60R - Manual (Page 33)

R. G. Sparber KG7MQL February 22, 2015 Page 33 of 52
Memory Mode: Memory Offset Tuning [31]
This is the infamous "tun" mode that so many people accidently enable. Exit the
"tun" mode by briefly pressing the BAND key.
The intent here is that you bring up a stored channel while in Memory Mode and
then can use it as a starting point for
tun
ing to a different frequency.
In this example, I start with my desired channel,
36.
I then briefly press the BAND key until
I see "tun" (tune) in the display. This means I can now
rotate the Dial knob and the frequency will
change.
Clockwise moves me up in frequency in steps
defined by STEP [77].
Counterclockwise moves me down in frequency in
steps defined by STEP [77].
When done, you can either press BAND again
which will take you back to the stored frequency
or press and hold the
F W key to store the new
frequency in memory (see step "5.").