Yaesu FT-60R - Manual (Page 37)

R. G. Sparber KG7MQL February 22, 2015 Page 37 of 52
Memory Mode: Memory Bank Recall
[33]
1. Insure you are in Memory Mode by pressing
V/M as necessary (see page 26)
2. Press and hold the BAND key until you see
either "BANK" or "NO BANK". The SEL
indicator will be flashing.
3. Within 3 seconds, rotate the Dial knob to select
the Bank you want to recall. If the Bank number
is flashing, it means this bank is empty so you
cannot select it.
4. Momentarily press the V/M key to select this
Bank.
5. If you selected a Bank, you should now see
BANK displayed. If you selected NO BANK,
then this indicator will not show.
xxx
Memory Bank Recall: BAND 1s /knob/VM