Sony XR-3753 - Manual (Page 10)

10
EN
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2 or 3).
“D-BASS”* appears in the display.
To cancel, turn the control to the OFF position.
* If an optional CD changer has the Digital D-BASS
function, “DIGITAL D-BASS” appears on the display
during CD playback (XR-C353 only).
Muting the beep tone
Press (6) while pressing (SEL).
To obtain the beep tone again, press these
buttons once more.
Note
If you connect an optional power amplifier and do not use
the built-in amplifier, the beep tone will be disabled (XR-
C353 only).
0dB
D-BASS 3
D-BASS 2
D-BASS 1
0dB
D-BASS 3
D-BASS 2
D-BASS 1
With Optional Equipment
CD/MD Changer (XR-C353 only)
You can control up to two CD or MD changers
with this unit.
Playing a CD/MD
Press (SOURCE) until the desired
changer indication appears on the
display.
CD/MD playback starts.
When a CD/MD changer is connected, all the
tracks play from the beginning.
Note
Even if you select an MD changer, “CD” appears in the
display.
Selecting CD/MD changers (when
several CD/MD changers are
connected)
Press (MODE) repeatedly to select the desired
CD/MD changer.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
$
Elapsed playback time
$
Disc and track number
$
Clock
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you wish
to skip.
To locate the succeeding tracks
To locate the preceding tracks
SEEK
AMS
Level
Digital D-BASS
Frequency (Hz)
Analog D-BASS
Level
Frequency (Hz)