ADLINK ACL-8216 User Manual
Page 28
20 • Installation
2.13 Daughter Board Connection
The ACL-8216 can be connected with five different daughter boards, ACLD-
8125, ACLD-9137, 9182, 9185, and 9188. The functionality and connections
are specified as follows.
2.13.1 Connect with ACLD-8125
The ACLD-8125 has a 37-pin D-sub connector, which can connect with ACL-
8216 through 37-pin assemble cable. The most outstanding feature of this
daughter board is a CJC ( cold junction compensation) circuit on board. You
can directly connect the thermocouple on the ACL-8125 board.
2.13.2 Connect with ACLD-9137
The ACLD-9137 is a direct connector for the card which is equipped with 37-
pin D-sub connector. This board provides a simple way for connection. It is
very suitable for the simple applications that do not need complex signal
condition before the A/D conversion is performed.
2.13.3 Connect with ACLD-9182
The ACLD-9182 is a 16 channel isolated digital input board. This board is
connected with CN1 of ACL-8216 via 20-pin flat cable. The advantage of
board is an 500Vdc isolation voltage is provided, and it can protect your PC
system from damage when an abnormal input signal is occurred.
2.13.4 Connect with ACLD-9185
The ACLD-9185 is a 16 channel SPDT relay output board. This board is
connected with CN2 of ACL-8216 via 20-pin flat cable. by using this board,
you can control outside device through the digital output signals.
2.13.5 Connect with ACLD-9188
ACLD-9188 is a general purpose terminal board for all the card which comes
equipped with 37-pin D-sub connector.