ADLINK PCIe-9814 - Manual (Page 39)

Operations 29
PCIe-9814
3.9 Multi-boot
The PCIe-9814 supports software-based firmware updates. If firm-
ware updates fail, the system may be unable to recognize the
module, in which case the following steps may solve the problem.
1. Config SW2 to "on"
2. Install the module and restart the system
3. If the module is recognized, update firmware again
(ensure the firmware you updated is workable)
4. Turn off the system, config SW2 to "off" and restart the
system.
The default state of SW2 is "off".
If the problem remains, please contact FAE.
Figure 3-16: Flash Memory Configuration Switch