Ditch Witch JT1220 - Manual (Page 139)

Systems and Equipment - 138
JT1220 Mach 1 Operator’s Manual
Quick Wrench
CMW
To Join
1. Scribe straight line across joint on both
sides of separating line (A).
2. Scribe second line (B) on moveable side of
joint in the opposite direction of tightening
action .25” (6 mm) away from first line.
3. Turn handle until second line (B) meets first
(A).
4. Turn handle opposite direction two turns to
relieve pressure.
5. Remove quick wrench components.
To Break
1. Turn handle until joint is broken.
2. Turn handle opposite direction two turns to relieve pressure.
3. Remove quick wrench components.