Ditch Witch JT1220 - Manual (Page 96)

JT1220 Mach 1 Operator’s Manual
Conduct a Bore - 95
Position Equipment
CMW
Position Equipment
1. Review bore plan and select drilling unit position and fluid unit position. See “Select Start and End
Points” on page 63.
2. Move equipment into selected positions.
Connect Fluid System
1. Connect fluid hose from mixing system to
drilling fluid pump. A 1.5” (38 mm) or larger,
non-collapsible hose is required.
2. Install y-strainer between mixing unit and
drilling fluid pump. Position strainer so that
drilling fluid flows in the direction of the arrow.
In most cases, positioning strainer at outlet of
mixing unit gives best results.
Electric shock. Contacting electric lines will cause death or serious injury.
Know location of lines and stay away.
NOTICE: If an electrical strike occurs while drilling unit is connected to a fluid system, the
fluid system will also become electrified. Do not connect drilling unit to a public or private
(business or home) water supply.
IMPORTANT: Clean y-strainer regularly. See
page 166.