EXFO VDSL2 - Manual (Page 156)

Getting Started with DSL and Ethernet Testing
148 AXS-200/635i
Saving Results
³
Available Graphs is enabled only if the selected format under
Save as Type is *.gif, *.csv, or *.bmp. For a test that does not have a
graph, this list box is unavailable.
³
Save Results button saves the test results in internal or external
memory (depending on the Save as Type format).
³
Filename is the current date and time stamp plus you can enter any
name. If it already exists, you will be prompted to overwrite the existing
file.
³
Report Header is where you can enter any comment. The initial value
is the current test followed by the date and time stamp.
³
Report’s File Name is where you can enter any name for the HTML
filename. If the name already exists, you will be prompted to overwrite
the existing file.The default extension is .html.
The default name is generated from the current time.
³
Save Report to USB button saves the results to an HTML report. If a
USB memory stick is not inserted, the following warning dialogue box
appears: USB device is not detected.
To set parameter values and save results:
1. Press the left/right and up/down arrow keys to highlight the desired
parameter.
2. Press to display the list or select the value.
3. Press the up/down arrow key to highlight the desired value.
OR
4. Press the left arrow key to erase the existing value, and then use the
alphanumeric keypad to enter a value. To cancel the entry, press .
5. Press to accept the value.