EXFO VDSL2 - Manual (Page 95)

Multi-meter Tests
Copper, VDSL2, ADSL2+ and IP Triple-Play Test Set 87
Multi-meter
To start/stop the test:
1. Press the up/down arrow keys to highlight the desired test parameter.
2. Press to open the list.
3. Press the up/down arrow keys to highlight the desired value, then press
to select it.
4. Select other parameters as required.
5. Press to start/stop the test.
Test results are displayed on the screen as they are completed.
Current
The Current tab allows you to
measure the AC/Loop currents and
frequency in the loop.
To start/stop the test:
Press
to start/stop the test.
Test results are displayed on the screen
as they are completed.