EXFO VDSL2 - Manual (Page 67)

Auto Tests
Copper, VDSL2, ADSL2+ and IP Triple-Play Test Set 59
Running Final/Active Pair Test and Viewing Results
Running Final/Active Pair Test and Viewing
Results
Results details are located on the Final/Active Pair Test pane tabs.
To run the tests and view results:
1. From the Final/Active Pair Test
pane use the up/down arrow keys
to highlight Run Test, and
press
.
2. Press the F1, F2, or F3 key to view
the various tabs. To view any
available additional tabs, use the
function arrow keys on either side
of the F1 and F3 keys.
Result Summary
The Result Summary tab displays a
summary of the measured voltage and
current values, and pass/fail status of
the Final/Active Pair tests.
³
Dialer Status displays the current
status of the Dialer such as
ON HOOK, OFF HOOK, DIAL
TONE DETECTED, and DIALING.
³
Ground Resistance displays the
measurement result value in Ohm, comparing the customer protector
ground resistance to an active central office pair. If an incorrect leads
connection is detected, Check Leads is displayed.