EXFO VDSL2 - Manual (Page 18)

Getting Started with Fault Isolation Tools
10 AXS-200/635i
Dialer Function
Dialer Function
The Dialer function provides a dial-up path from the AXS-200/635i to
another tester (or quiet termination or silent switchman) through a
switched circuit network. DTMF transmission is enabled via the AXS-200
keypad allowing you to place and receive POTS calls. The dialer can be
accessed from the Home pane and is also integrated into individual test
screens to give you quick access to the manual dialer function, speed dial
and last dialed lists, without exiting the current test application.
Dialer
The Dialer menu item/tab allows you to use the unit as a telephone (with a
headset) and the AXS-200 keypad as a dialer keypad when the Dialer is
invoked, whether in the test results screens or through the separate
dedicated Dialer application. It goes off hook immediately when entered
from the menu or when switched from another tab.This allows you to
quickly check if the circuit under test has dial tone or is a digital service.
Each parameter and button are described below:
³
The edit box is where you enter
the phone number you wish to
dial. You can add this number to
the Phone Book by pressing the
Add to Phone Book button.
³
Dial button is enabled whether or
not there is a number present in
the edit box. If there is a number, it
will be dialed. If not, pressing the
Dial button will cause the unit to go off hook and a new placing a call
pane appears where you can manually dial a number from the keypad.