EXFO VDSL2 - Manual (Page 62)

Auto Tests
54 AXS-200/635i
Final/Active Pair Test
Final/Active Pair Test
The final/active pair test is an auto-test
that performs several individual
measurements in sequence. It also
automatically dials a few special
phone numbers in the phone book to
set up the line into the various specific
termination modes during the test. The
test provides a pass/fail summary as
well as detailed text/graphical results.
Configuring Final/Active Pair Test
Parameters for auto test configuration are on the Final/Active Pair Test
pane tabs.
To view the test configuration
tabs:
1. From the Final/Active Pair Test
pane use the up/down arrow keys
to highlight Test Configuration,
and press
.
2. Press the F1, F2, or F3 key to view
the various tabs. To view any
available additional tabs, use the
function arrow keys on either side of the F1 and F3 keys.