EXFO AXS-200/850 Ethernet Test Set - Manual (Page 142)

Traffic Generation & Monitoring
132 AXS-200/850
Stream Configuration
³
TTL for IPv4 and Hop Limit (TTL) for IPv6
Enter the Time to Live (TTL) value. The accepted range is from
0 to 255 with a default of 128.
³
TOS/DS for IPv4 and Traffic Class (TOS/DS) for IPv6
Select Type of Service (TOS) or Differentiated Services (DS).
Note: It is possible to configure the TOS/DS parameter using either the
hexadecimal code (00 to FF) or binary code.
³
If TOS is selected, go to the next field to
enter the hexadecimal code 00 to FF or go
to the field underneath to enter the binary
code.
The possible values are shown as follows:
Parameter Value
Precedence 000 (Routine), 001 (Priority), 010 (Immediate),
011 (Flash), 100 (Flash Override), 101 (CRITIC/ECP),
110 (Internet Control), 111 (Network Control)
Default: 000 (Routine)
Delay Normal / Low (0/1)
Default: Normal
Throughput Normal / High (0/1)
Default: Normal
Reliability Normal / High (0/1)
Default: Normal
Monetary Cost Normal / Low (0/1)
Default: Normal
Reserved bit 0 or 1
Default: 0