EXFO AXS-200/850 Ethernet Test Set - Manual (Page 198)

Tools
188 AXS-200/850
Ping Results
Ping Results
Press , select Tools, Ping, and the Results tab.
To succeed, a Ping command shall be acknowledged by the network
device within a given delay (Timeout). Typically a Ping command can fail
for the following reasons:
³
The IP address is unavailable
or unknown.
³
The time allowed to perform
the Ping command is too short.
³
The remote device is not
supporting ICMP messaging.
The Ping results are displayed with the
following columns:
³
No.: Indicates the attempt number.
I
MPORTANT
Test results/statistics are cleared when changing test or tool
selection. It is highly advised to generate and save the report once
the current test is completed. See Report Generation on page 79 to
generate and save a report file.