EXFO AXS-200/850 Ethernet Test Set - Manual (Page 157)

Traffic Generation & Monitoring
Ethernet Test Set 147
Network Configuration
Network Configuration
Network Configuration allows to configure the network parameters for the
background streams.
Press , select Traffic Generation & Monitoring, Background Stream
Config, and the Network tab.
When IPv4 version is selected, configure the following fields in the Stream
tab.
³
Background Stream: Select any
of the three background streams
for which the network parameters
are to be configured.
³
IP Address: Configure the source
IP Address for the selected
background stream. The default
IP address is 10.10.0.0.
³
Subnet Mask: Configure the
Subnet Mask for the selected background stream. The accepted range
is from 0.0.0.0 to 255.255.255.255. The default value is 255.255.0.0.
³
Default Gateway: Enable or disable the Default Gateway. The default
setting is Enabled. If enabled, enter the default gateway address for
the Ethernet port. The default value is 0.0.0.0.