EXFO AXS-200/850 Ethernet Test Set - Manual (Page 156)

Traffic Generation & Monitoring
146 AXS-200/850
Stream Configuration
The possible values are shown as follows:
³
Flow Label (For IPv6 only): Enter the Flow Label value. The
acceptable range is from 0 to 1048575. The default value is 0.
³
Source/Destination UDP Ports: Enter the Source UDP Port. The
accepted range is from 0 to 65535. The default value is 49184. Enter
the Destination UDP Port. The accepted range is from 0 to 65535. The
default value is 7.
Parameter Value Bit
DSCP Codepoints 000000 (CS0), 001000 (CS1), 010000 (CS2),
011000 (CS3), 100000 (CS4), 101000 (CS5),
110000 (CS6), 111000 (CS7), 001010 (AF11),
001100 (AF12), 001110 (AF13), 010010 (AF21),
10100 (AF22), 010110 (AF23), 011010 (AF31),
011100 (AF32), 011110 (AF33), 100010 (AF41),
100100 (AF42), 100110 (AF43), 101110 (EF),
Default: 000000 (CS0)
1-6
ECN 00 (Not-ECT), 01 (ECT-1), 10 (ECT 0),11 (CE)
Default: 00 (Not-ECT) 7-8