EXFO IQS-1500 Power Meters for IQS-500/600 - Manual (Page 113)

Power Meters 105
A Technical Specifications
I
MPORTANT
The following technical specifications can change without notice.
The information presented in this section is provided as a reference
only. To obtain this product’s most recent technical specifications,
visit the EXFO Web site at www.exfo.com.
Model IQS-1102X IQS-1103
Detector type GeX InGaAs
Detector size (mm) 2 1
Wavelength range (nm) 750 to 1700 800 to 1700
Power range 2 (dBm) 20 to -75 9 to -100
Uncertainty 3 (dB) ± 5 % ± 5 %
(1000 to 1650 nm) (1000 to 1640 nm)
(+10 to -35 dBm) (0 to -60 dBm)
Linearity 4 (dB) ± 0.015 ± 0.015
(10 to -35 dBm) (0 to -60 dBm)
Power resolution 4 (dB) 0.001 0.001
(20 to -35 dBm) (9 to -60 dBm)
Wavelength resolution (nm) 1 1
Fiber type ( μm) 5/125 to 62.5/125 5/125 to 62.5/125
Instrument Drivers
LabVIEW™ drivers , SCPI commands and COM/DCOM librairies
Remote Control
With IQS-500: GPIB (IEEE-488.1, IEEE-488.2) Ethernet and RS-232.
Standard Accessories
User Guide; one fiber-optic adapter per channel; Certificate of Compliance;
Certificate of Calibration.
General Specifications
IQS-1100
Dimensions (H x W x D) 12.5 cm x 3.6 cm x 28.2 cm
(4
15 / 16 in x 1 7 / 16 in x 11 1 / 8 in)
Weight 0.63 kg (1.4 lb)
Temperature (operating) 0 °C to 40 °C (32 °F to 104 °F)
(storage) -40 °C to 70 °C (-40 °F to 158 °F)
Relative humidity 5 0 % to 80 % non-condensing
Notes
1. All power specifications are at 1310 nm unless otherwise specified, and after a
warmup period of 20 minutes followed by an offset nulling.
2. From 0 °C to 30 °C.
3. At 23 °C ± 1 °C with FOA-222. For GeX detectors, add 1 % to uncertainty below
1000 nm, and 3 % over 1650 nm. For InGaAs detectors, add 1 % to uncertainty
below 1000 nm and 6 % over 1640 nm. All uncertainties were valid on the day
of calibration.
4. For a temperature that is stable within ± 1 °C in the 0 °C to 40 °C range.
5. Measured in the 0 °C to 40 °C range.