Initiate[1..n]:continuous – EXFO IQS-1500 Power Meters for IQS-500/600 User Manual
Page 123
SCPI Command Reference
Power Meters
115
Product-Specific Commands—Description
:INITiate[1..n]:CONTinuous
Description
Sets continuous acquisition mode and starts or
stops the acquisition.
Syntax
:INITiate[1..n]:CONTinuous<wsp><Continuous
Acquisition>
Parameter(s)
ContinuousAcquisition:
The program data syntax for
<ContinuousAcquisition> is defined as a
<Boolean Program Data> element. The
<ContinuousAcquisition> special forms ON and
OFF are accepted on input for increased
readability. ON corresponds to 1 and OFF
corresponds to 0.
This parameter changes the continuous
acquisition status:
0 or OFF - Stops continuous acquisition.
1 or ON - Starts continuous acquisition.
Example(s)
INIT:CONT ON
INIT:CONT OFF
See Also
ABORt
INITiate:CONTinuous?
MMEMory:ACQuisition
MMEMory:ACQuisition?